Development:Prana Breath API/Collections:Trainings

trainings, or trngs - Collection that gives control over all trainings in the app.

Prefix

• pranabreath:// - Case-insensitive.
• https://pranabreath.olekdia.com/ - Case-sensitive.
• https://pranabreath.info/ - Case-sensitive.
• https://pranabreath.page.link/?link=https://pranabreath.olekdia.com/ - Case-sensitive.

Syntax

• pranabreath://trainings/item?cmd=[Command] - Case-insensitive.
• pranabreath://Trainings/item?[Parameter]=[Value]
• pranabreath://trainings/item?cmd=[Command]&[Parameter1]=[Value1]&[Parameter2]=[Value2]
• https://pranabreath.olekdia.com/trainings?cmd=[Command]&[Parameter]=[Value] - Case-sensitive.

Commands

Command	Description
list	Returns training list. Currently it is used only in console for retrieving a training list. pranabreath://trainings?cmd=list pos id public_id name 0 1 1 Clear mind 1 2 2 Relax 2 3 3 Calming 3 4 4 Power 4 5 5 Harmony 5 6 6 Anti-stress 6 7 7 Anti-appetite 7 8 8 Cigarette replace 8 9 11 Bhastrika pranabreath://trainings - It is a default command if collection is defined without an item, so if we omit the command it will return the same result.
select	Select the specified training. Other than their specific effect, commands import, create and start do select as well. pranabreath://trainings/Harmony?cmd=select - Select Harmony training. pranabreath://trainings/Harmony - Select Harmony. Select is a default command if ?cmd= is omitted.
import	Import the specified training into the app. pranabreath://trainings/Sitkari?cmd=import - Import Sitkari training. pranabreath://trainings?cmd=import&public_id=25 - Import training with public_id equals 25 which is Ha breathing training. pranabreath://trainings?cmd=import&json_data={"ENTRY":"TRAINING","name":"my_training","dur_time":480,} - Import the training which is a value of json_data parameter. The string that represents training should be encoded. https://pranabreath.olekdia.com/trainings?cmd=import&json_data=%7B%22ENTRY%22%3A%22TRAINING%22%2C%22name%22%3A%22my_training%22%2C%22dur_time%22%3A480%2C%7D - Same as above, but training is represented by an encoded string. It is mandatory to use with a web link.
create	Create the training with certain parameters. If training with such name already exists - new training will not be created. Instead all parameters will be applied to existing training. pranabreath://trainings?cmd=create&name=Serenity&trng_type=1 - Create meditation named "Serenity". pranabreath://trainings?cmd=create&name=4_7_8_Breathing&dur_prep_time=5000&trng_cycles={"mValues":[{"mInhaleUnit":4,"mRetainUnit":7,"mExhaleUnit":8,"mMethodsBitSet":129,"mSecPerUnit":1000}],"mKeys":[0,]} - Create training named "4_7_8_Breathing", with 5 seconds preparing time, and 4:7:8:0 ratio.
start	Starts the selected training. If there is no such training - nothing happens. But if the training with such name is featured in the training list on our wiki, it will be automatically imported and started. pranabreath://trainings/Clear_mind?cmd=start - Select and start Clear mind training. Also it brings the app to foreground with Training tab selected. pranabreath://trainings/Some_custom_name?cmd=start&dur_time=240000 - If there is no "Some_custom_name" in the app - nothing happens. If it exists, it starts with training duration of 4 minutes. pranabreath://trainings/2?cmd=start - Select and start training with id equals 2. pranabreath://trainings/Bhastrika?cmd=start - Select and start "Bhastrika" training. If there is no such training, Bhastrika is imported and started. pranabreath://trainings?cmd=start&json_data={"ENTRY":"TRAINING","name":"custom_trng","dur_time":420,} - Import and start the training that is a value of json_data parameter.
delete	Delete the selected training. If there is no selected training - nothing happens. pranabreath://trngs/14?cmd=delete - Delete the training with id equals 14. pranabreath://trngs/Relax?cmd=delete - Delete Relax training.
info	Show the information about training on this wiki. It is applicable only for the default trainings and for the trainings importable from this wiki. pranabreath://trainings/Sitkari?cmd=info - Go to the wiki page of Sitkari training. pranabreath://trainings?cmd=info&public_id=25 - Go to the wiki page that has public_id equals 25, that is Ha breathing.

Parameters

Parameter	Description
name	Name of the training. pranabreath://trainings/Power?name=Energy - Rename "Power" training to "Energy". https://pranabreath.olekdia.com/Trainings/5?name=Balance - Rename training with ID equals 5, set name as "Balance".
public_id	Indicates public id of the training. All trainings in this list have their own public_id. All public_id are listed here. It is a read-only value. pranabreath://trngs?cmd=import&public_id=25 - Import training with public_id equals 25, which is Ha breathing training.
trng_type	Is a kind of the training. Value range is [0 - breathing session, 1 - meditation]. pranabreath://trainings?cmd=create&name=Serenity&trng_type=1 - Create meditation named "Serenity".
pos	Position of the training in the training list. pranabreath://trainings/Clear_mind?pos=9999 - Move Clear mind training to the very bottom of the list.
curr_level	Selected complexity level of a training (if applicable). Value range is [1, 5] pranabreath://trngs/1?curr_level=3 - Set complexity level to "Advanced" for Clear mind training.
dur_time or duration	Training duration, in milliseconds (if this value is set, training duration mode is be measured in amount of time). Value range is [60000, 59940000] https://pranabreath.olekdia.com/trainings/1?dur_time=480000 - Set training duration to 480000 millis (8 minutes) for the training with id equals 1.
dur_num_cycles or num_iterations	Training duration, in amount of cycles (if this value is set, training duration mode is be measured in amount of cycles). Value range is [1, 999] pranabreath://trainings/Relax?dur_num_cycles=18 - Set training duration to 18 cycles for Relax training.
dur_prep_time	Preparing time duration, in milliseconds. Value range is [0, 60000] https://pranabreath.olekdia.com/trainings/Harmony?dur_prep_time=5000 - Set preparing time to 5 seconds for Harmony training.
dynamic or trng_cycles	The object that represents breathing or repose cycles of the training. pranabreath://trainings/15?dynamic={"mValues":[{"mInhaleUnit":1,"mExhaleUnit":1,"mSecPerUnit":6500}{"mInhaleUnit":1,"mExhaleUnit":1,"mSecPerUnit":7000}{"mInhaleUnit":1,"mExhaleUnit":1,"mSecPerUnit":7300}],"mKeys":[0,1,2,]} - Set 3 cycles with the [[Ratio_of_breath_cycle|ratio] 1:0:1:0. First cycle has 6.5 seconds per ratio unit, second - 7 seconds, and third - 7.3 seconds.
dynamic_enabled	Turns dynamic mode on. Value range is [true, false]. pranabreath://trainings/Harmony?dynamic_enabled=true - Enable dynamic mode for Harmony training.
time_per_unit	Time per ratio unit, measured in milliseconds. Value range is [100, 99000]. If unsigned, this value is applied for every cycle across the trainings. If it has a sign - the value is decreased or increased every next cycle. Use %2B instead of + and %2D instead of - for the URL safety. pranabreath://trainings/Relax&time_per_unit=6300 - Set 6,3 seconds per ratio unit for Relax training. pranabreath://trainings/Relax&time_per_unit=%2B500 - Increase seconds per ratio unit for all cycles by 0.5 seconds for Relax training. It keeps the cycle ratio in dynamic mode the same, but increases overall training complexity.
custom_chants	The custom chants of the training. pranabreath://trainings?cmd=create&name=Chanting_breathing&custom_chants=["Qm9vb20%3D","VmFhYW0%3D","UmFhYW0%3D"]&dynamic={"mValues":[{"mInhaleUnit":1,"mExhaleUnit":1,"mSustainUnit":2,"mChantsBitSet":1073742800,"mSecPerUnit":3000}],"mKeys":[0,]} - Create the training with custom chants. Chants are specified as an array, and also every chant is Base64 encoded for the URL safety. In this example we set "Raaam" chant for the inhaling and "Vaaam" chant for the exhaling phases.
note	The training note. pranabreath://trainings/Relax?note=VGhpcyB0cmFpbmluZyBpcyByZWFsbHkgaGVscGZ1bCBhZnRlciBsb25nIGNvbmNlbnRyYXRpb24%3D - Set the training note for Relax training. It totally replaces previous note if it exists. The note should be Base64 encoded for the URL safety.
json_data	Data of training (.trng) file for importing. pranabreath://trainings?cmd=import&json_data={"ENTRY":"TRAINING","name":"my_training"}" - Import the training named "my_training".