Development:Prana Breath API/Collections:Trainings

trainings, or trngs - collection that gives you access to all trainings in the app.

Commands

Command	Description
list	Returns training list. Currently it is only used in console for retrieving training list. pranabreath://trainings?cmd=list pos id public_id name 0 1 1 Clear mind 1 2 2 Relax 2 3 3 Calming 3 4 4 Power 4 5 5 Harmony 5 6 6 Anti-stress 6 7 7 Anti-appetite 7 8 8 Cigarette replace 8 9 11 Bhastrika pranabreath://trainings - It is a default command when only collection is defined without an item, so if we omit the command it will return the same result.
import	Import the specified training into the app. pranabreath://trainings/Sitkari?cmd=import - Import Sitkari training. pranabreath://trainings?cmd=import&public_id=25 - Import training with public_id equals 25 which is Ha breathing training. pranabreath://trainings?cmd=import&json_data={"ENTRY":"TRAINING","name":"my_training","dur_time":480} - Import the training which is a value of json_data parameter. The string which represents training should be encoded https://olekdia.com/pranabreath/Trainings?cmd=import&json_data=%7B%22ENTRY%22%3A%22TRAINING%22%2C%22name%22%3A%22my_training%22%2C%22dur_time%22%3A480%2C%7D - Same as above but training is represented by encoded string. It is mandatory to use with web link.
create	Create the training with defined parameters. If training with such name already exists - new training will not be created. Instead all parameters will be applied to this training. pranabreath://trainings?cmd=create&name=Serenity&trng_type=1 - Create meditation with name "Serenity". pranabreath://trainings?cmd=create&name=4_7_8_Breathing&dur_prep_time=5000&trng_cycles={"mValues":[{"mInhaleUnit":4,"mRetainUnit":7,"mExhaleUnit":8,"mMethodsBitSet":129,"mSecPerUnit":1000}],"mKeys":[0,]} - Create training with name "4_7_8_Breathing", with 5 seconds preparing time, and 4:7:8:0 ratio
start	Starts the selected training. If there is no an entered training - nothing happens, if only the training name is set from public training list, in such case it will be imported automatically and started. pranabreath://trainings/Clear_mind?cmd=start - Clear mind training will be selected and started. Also it will bring the app to foreground with Training tab selected. pranabreath://trainings/Some_custom_name?cmd=start - If there is no "Some_custom_name" in the app - nothing happens. pranabreath://trainings/2?cmd=start - Training with id == 2 will be selected and started. pranabreath://trainings/Bhastrika?cmd=start - Training with name "Bhastrika" will be selected and started. If there is no such training Bhastrika training will be imported and started.
delete	Delete the selected training. If there is no an entered training - nothing happens
info

Parameters

Parameter	Description
name	Name of the training. pranabreath://trainings/Power?name=Energy - Rename the "Power" training to "Energy". https://olekdia.com/pranabreath/Trainings/5?name=Balance - Rename a training with equals 5, set name as "Balance".
public_id	Indicates public id of the training. All trainings in this list have their own public_id. Readonly value. pranabreath://trngs?cmd=import&public_id=25 - Import training with public_id equals 25 which is Ha breathing training.
trng_type	Is a kind of the training. Value range is [0 - breathing session, 1 - meditation]. pranabreath://trainings?cmd=create&name=Serenity&trng_type=1 - Create meditation with name "Serenity".
pos	Position of the training in the training list. pranabreath://trainings/Clear_mind?pos=9999 - Move the Clear mind training to the very bottom of the list.
curr_level	Selected complexity level of a training (if applicable). Value range is [1, 5] pranabreath://trngs/1?curr_level=3 - Set complexity level to "Advanced" for clear mind training
dur_time, or duration	Training duration, in milliseconds (if this value is set, training duration mode will be measured in amount of time). Value range is [1, 999] https://olekdia.com/pranabreath/Trainings/1?dur_time=480000 - Set training duration to 480000 millis or 8 minutes for the training with id equals 1.
dur_num_cycles, or num_iterations	Training duration, in amount of cycles (if this value is set, training duration mode will be measured in amount of cycles). Value range is [1, 999] pranabreath://trainings/Relax?dur_num_cycles=18 - Set training duration to 18 cycles for the Relax training.
dur_prep_time	Preparing time duration, in milliseconds. Value range is [0, 60000] https://olekdia.com/pranabreath/Trainings/Harmony?dur_prep_time=5000 - Set the preparing time to 5 seconds for the Harmony training.
dynamic, or trng_cycles	The object which represents breathing or repose cycles of the training. pranabreath://trainings/15?dynamic={"mValues":[{"mInhaleUnit":1,"mExhaleUnit":1,"mSecPerUnit":6500}{"mInhaleUnit":1,"mExhaleUnit":1,"mSecPerUnit":7000}{"mInhaleUnit":1,"mExhaleUnit":1,"mSecPerUnit":7300}],"mKeys":[0,1,2,]} - Set the 3 cycles with [[Ratio_of_breath_cycle|ratio] 1:0:1:0. First cycles has 6.5 seconds per ratio unit, second 7 seconds and third 7.3 seconds.
dynamic_enabled	Trigger dynamic mode. Value range is [true, false]. pranabreath://trainings/Harmony?dynamic_enabled=true - Enable dynamic mode for the Harmony training.
time_per_unit	The training note. Time per ratio unit, measured in milliseconds. Value range is [100, 99000].
custom_chants	The custom chants of the training. pranabreath://trainings?cmd=create&name=Chanting_breathing&custom_chants=["Qm9vb20%3D","VmFhYW0%3D","UmFhYW0%3D"]&dynamic={"mValues":[{"mInhaleUnit":1,"mExhaleUnit":1,"mSustainUnit":2,"mChantsBitSet":1073742800,"mSecPerUnit":3000}],"mKeys":[0,]} - Create the training with custom chants. Chants are passed as an array and also every chant is Base64 encoded for the URL safety. In this example we set "Raaam" chant for the inhaling and "Vaaam" chant for the exhaling.
note	The training note. pranabreath://trainings/Relax?note=VGhpcyB0cmFpbmluZyBpcyByZWFsbHkgaGVscGZ1bCBhZnRlciBsb25nIGNvbmNlbnRyYXRpb24%3D - Set the training note for the Relax training. It will totally replace previous note if it existed. The note should be Base64 encoded for the URL safety.
json_data	Data of training (.trng) file for importing. pranabreath://trainings?cmd=import&json_data={"ENTRY":"TRAINING","name":"my_training"}" - Import the training with "my_training" name.